The universal control distributor

Part no.	description	Technical coordinates
85025004	A device for remote control Two-section, dual action	Max. operating pressure: 250 bar nominal flow rate: max. 100 l / min. Tightening torque: 78 Nm Connection: R 3/4 ", R 1/2" Size: 250 x 160 x 90 mm
Monoblock two-section has two double-acting pistons. The body is made from a special hydraulic casting. pistons were subjected to a special hardening and nickel. valve Load- Sensing is equipped with a multi-way valve, which activates the signal Load-sensing. Both valves are valves partial antiphase, allowing for the control of mixing. Each port can simultaneously Impact valve fitted.
850A15742KPL15	Hydraulic splitter line 1500 mm.	element standard with 2 sliders control, pressure limiter and check valve 40 l / min, 1 x floating function, 2x function double-acting, 3/8 ", for further transmission of the pressure Bushings are required to match, in the case of continuous impact pressure relief valve should be set to the maximum
850A15742KPL20	Hydraulic splitter line 2000 mm	element standard with 2 sliders control, limiter pressure and check valve 40 l / min, 1 x feature a floating, 2x with the function of double-acting, 3/8 ", for further transmission pressure sleeves are required to match, in the case of continuous effect of a pressure relief valve should be set to maximum
85081002	PRESSURE CARRY-OVER X-SD-5-O-AE for pressure expansion
85081005	THREADED FITTING X-SD-5-O-AEK (JD) For permanent pressure (John Deere)
850A15742KPL/Ew15	Hydraulic splitter line 1500 mm
850A15742KPL/Ew20	Hydraulic splitter line 2000 mm
85081002	The sleeve to transmit the pressure to the hydraulic distributor 45 l/min.
85081005	Screw plug for pressure resistant (John Deere) with hydraulic distributor 40 l/min.

All FREJUS replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only.